Search This Blog

Tuesday, April 29, 2014

LEAR BD4.2: The next-generation hybrid

Continued from Aesthetics



Exclusively designed by LEAR of Hong Kong,  BD4.2 is claimed to feature ground-breaking innovations:



1. Quad-bore configuration
2. Metallic acoustic transfer tubing
3. Adjustable bass control
4. Acoustic low-pass filter

First, separate acoustic transfer tubes, or bores, help minimize the possible interference with sound waves coming from each drivers, while shaping their linear characteristics in specific manner to tailor-fit them to the manufacturer's requirement. As far as I know, no IEM manufacturer has ever tried quad bore, especially when even a 12-driver JH Audio Roxanne has only triple bores.

Second, metallic bores have previously been implemented by Suyama of Japan, and such tubes tend to have lower resonance frequency compared to the ones made of materials with lower density. Moreover, they also yield stable high frequency response due to the tube's constant geometry. The same logic may apply here with BD4.2 as well.

Third, although making the low frequency response fully adjustable may sound tempting, adding an extra adjustable module always increases the cost of development and production. Moreover, most of the bass control implemented in conventional IEMs are poorly designed, and lacks accuracy.

Fourth, other than Ultimate Ears UE900 and Shure SE846, and I've never witnessed such filter placed at the output of an IEM. It usually utilizes a long acoustic transfer tubing, and requires a good amount of calculation, not to mention precise engineering to be practically beneficial.

Consequently, the ultimate question is: Are all of the innovations claimed by LEAR true, and if so, is it possible that they work to the overall benefit of users?





PRO: Well-damped time domain characteristic especially in the low frequency region, where the effect of the acoustic low-pass filter dominates. Channel matching is superbly good too. The IEM's high modifiability is a huge plus.

CON: Inverted polarity, which can easily be corrected by swapping the cable's two-pin plug inversely.

ON SECOND THOUGHT #1: Custom version(LCM) users should be aware that the insertion depth and the projected frequency response of their units will be somewhere between those of the reference plane and 3 mm. Here's a good news though: Unless inserted extremely shallow, BD4.2's treble linearity is not affected by the insertion depth.

ON SECOND THOUGHT #2: Source impedance must remain below 1 Ω in order to retain the IEM's linear characteristic unless very specific tonal balance is desired. Otherwise, the output follows its own impedance characteristic as the source impedance increases, and the treble is attenuated accordingly. With added impedance of 33 Ω, the sensitivity at 10 kHz drops down about 8 dB relative to 100 Hz.

ON SECOND THOUGHT #3: As claimed by the manufacturer, all four bores are working independently covering their own frequency ranges. While upper metallic bores are dedicated to mid-range and treble, the bottom ones are woofers, working together to cover the frequency range below 400 Hz.

The quad-bore shown on the right with the bass control on the left
And this is where BD4.2 shines the brightest: The top two bores can actually be damped according to users' personal tastes by using a piece of foam only, and enable users to easily experiment with various tonal balances at their disposal.

ON SECOND THOUGHT #4: On top of highly modifiable bores, the bass can also be tuned with the adjustable bass control along with the rear housing vent. Surprisingly, the bass control is quite accurate, and boosts the frequency range below 1 kHz at the scale of whooping 24 dB(minimum to maximum) with extremely low Q-value.

ON SECOND THOUGHT #5: BD4.2 comes with five different types of ear sleeves, and each type has its own advantage. Please be advised that the stock sleeve used in this analysis is the single flange sleeve.

ON SECOND THOUGHT #6: Here are my recommendations. While the first one is strictly diffuse-field oriented with the treble extension limited to mimic the sound of Suyama's Fitear 334, the second recommendation sounds very close to Sennheiser IE800 with the mid-high response enhanced.

Recommendation 1: First of all, equip a pair of Sony MH1 sleeves(Sony hybrids, Phonak stock, or Shure EA510) to finely shape the treble response above 10 kHz. Second, minimize the bass control. Third, insert a piece of earbud foam(0.5 mm x 0.5 mm x 0.5 mm) to the right upper metal bore. Fourth, couple the IEM with a 33 Ω resistor in serial. This setting is recommended when a source device with high output impedance is used to drive the IEM.

Recommendation 2:  First of all equip a pair of Sony MH1 sleeves(Sony hybrids, Phonak stock, or Shure EA510) to finely shape the treble response above 10 kHz. Second, leave the bass control at stock position. Third, insert a piece of earbud foam(0.5 mm x 0.5 mm x 0.5 mm) to the right upper metal bore. The source impedance shall remain below 1 Ω.

ON SECOND THOUGHT #7: The IEM in stock configuration is slightly bright in the mid-high range when compensated with Harman International's reference target.

IN CONLUSION: LEAR BD4.2 is unlike anything I've ever measured so far. Yes, the claims made by the manufacturer turn out to be all true, and the accumulated effects from the innovations add up to the benefit of users.


The stock configuration presented by LEAR is superb too, but the fact that the sound signature can be finely adjusted without having to modify the IEM's internal components shall be praised & glorified the most. There are simply endless possibilities for users to discover by means of both simple acoustical & electrical tweaks. And because of that, I acknowledge BD4.2 as one of the IEMs with highest quality of all, and one of my most favorite headphones as well.

More information on this product: 
http://lear.hk/products/All/LUF_BD4_2/52

16 comments:

  1. Great writeup Rin.

    -when did you get your test pair (when was it made).


    -5k peak and ringing in the CSD and FR?

    -also what's the orange line in the Imped/freq chart?


    > Source impedance must remain below 1 Ω

    -I can understand clip+ ~1 ohm, but can you list some < 1 ohm sources?


    -any comments on the overall perceived speed of decay across the FR? + imp rest?

    esp vs say T-PEOS H300?

    -or on the shape of the bass curve when tuned up (i think the prefernce is ala h300 going more steeply towards the 20hz, and less 200-500hz)


    -any comments on the 1k and 5k distorion peaks?



    >BD4.2 comes with five different types of ear sleeves, and each type has its own advantage. Please be advised that the stock sleeve used in this analysis is the single flange sleeve.

    -any comments on fit -these look huge. For universals it can be hard to tip roll vs comfort.




    >CON: Inverted polarity, which can easily be corrected by swapping the cable's two-pin plug inversely.


    -any comments from Lear (e.g. MMCX plugs = hard to do that)





    ps keep in mind a much smaller 2DD + 2BA is out from Tralucent (Ref 1)

    ReplyDelete
    Replies
    1. ps what bass tuning pot setting was the freq/imp/phase chart made at?


      >-also what's the orange line in the Imped/freq chart?

      nvm - impedance.

      why??? never seen one like that before.
      effects on source (amp) and req output impedance with say 3 ohms and 10 ohms

      ps just noticed the blocked port ones - mmm - great write up again :) !

      Delete
  2. 흐음...괜찬은듯 하면서도 뭔가 어설프네요

    ReplyDelete
  3. Thanks For Sharing Great Insight.
    Protect your Pc/laptop and other devices with the best max Secure. Get security against spyware, malware, and viruses
    Dial Our Antivirus Support Number: +(1)-888-846-5560
    For More Visit: Eset Support Number

    ReplyDelete
  4. Avail the technicians help whenever you face any type of technical glitches with antivirus as a minor fault can affect the work badly. Troubleshoot your errors by dialing Antivirus Support Phone Number +(1)-888-846-5560. Our experts team is available 24*7 hours to help you out.

    Norton Support Number
    Kaspersky Support Number
    McAfee Support Number
    Avast Support Number
    AVG Support Phone Number

    ReplyDelete
  5. We give mindful support of the entire procedure to resolve your technical faults under the guidance of experienced professionals. Call Antivirus Support Phone Number USA

    ReplyDelete
  6. Look no further if you want guided-solutions on how to download, install, and activate Avast Antivirus setup that will help secure your device from threats. CAll Avast Antivirus Support Phone Number +(1)-888-846-5560 or even you can visit our website@ Antivirus Support Number

    ReplyDelete
  7. With a maximum number of active users, Facebook is leading in social media platform. Also, internet cybercrime is increasing. We are committed to provide support for all type of technical issues. Our Support is available 24*7 to help you with your problem. Dial +(1) 877 207 4415 Facebook Customer Support Phone Number for instant help.

    ReplyDelete
  8. How Can I Resolve My Yahoo Account Not Working?

    On the aspect of popularity, Yahoo is one of the most renowned emailing service providers existing in today’s digital world. However, some of its users are getting an issue of the Yahoo email not working. If you are not able to fix this issue on your own, you must contact one of our experts.

    ReplyDelete
  9. Enabling Java especially on Chrome is no doubt included simple steps, yet some users don’t know how to enable Java in Google Chrome. Well, just by going through the settings and under the site settings, you can find the JavaScript and enable it. However, if you still need technical guidance, feel free to connect with our technical expert right away.

    Related Query

    why my Google Chrome is not working

    ReplyDelete
  10. Yahoo Mail is one of the best email services globally. However, issues like Yahoo Mail not syncing might often create hindrances at your work. Such types of issues can be frustrating, especially if you require urgent access to your emails. Resolving the Yahoo Mail not syncing on iPhone needs to follow some basic troubleshooting. So, first, check if your iPhone is connected to the internet via Wi-Fi or through cellular data. If not, turn on LTE if you are using cellular data. If the problem persists on your iPhone, delete and re-add your Yahoo Mail account and check if this solves the issue.

    ReplyDelete
  11. Just Wow, I have to say that coming across your Ghaziabad Satta blog changed my life. Everyone who plays Satta King will love your content, your style of writing and most importantly the information you share in the post. It is good to find a place that not only shares useful information but also keeps people interested. Your smart ideas, tips, instructions and thoughts really struck a chord with me. I appreciate all the effort and work you put into making such great informative content. Keep up your great work!

    ReplyDelete
  12. This comment has been removed by the author.

    ReplyDelete
  13. Thanks for sharing such article. Induce India is helping you providing BEE Certification in India do visit us.

    ReplyDelete